HowTos/SanDisk ConnectPlus wi-fi with collie
From OpenZaurus
This is how to get the wi-fi part of the SanDisk ConnectPlus wi-fi cum storage card on a collie with Openzaurus 3.5.4. It _may_ work with other models. I only have a collie :).
I suggest you put the files on a cf or sd card.
1. Flash w/ openzaurus 3.5.4
2. ipkg update << doesn't seem to work without this
3. ipkg install hostap* << see below for list of files
If you get an error about hostap-conf execute steps 4 & 5 below else go straight to step 6
4. ipkg remove -force-depends hostap-conf
5. ipkg install hostap-conf_1.0-r4_all.ipk
6. ipkg install prism3* << again see below for list of files
insert the card and voila !!! wi-fi works :)
you will get the hostap* files here:
http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4/feed/upgrades/machine/collie/hostap-modules-2.4.18-rmk7-pxa3-embedix_0.4.7-r4_collie.ipk http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4/feed/upgrades/machine/collie/hostap-modules-cs-2.4.18-rmk7-pxa3-embedix_0.4.7-r4_collie.ipk http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4/feed/upgrades/machine/collie/hostap-modules-pci-2.4.18-rmk7-pxa3-embedix_0.4.7-r4_collie.ipk http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4/feed/upgrades/hostap-conf_1.0-r4_all.ipk
you will get the prism3-support and prism3-firmware files here:
http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4/feed/base/prism3-firmware_1.8.4-r0_all.ipk http://ewi546.ewi.utwente.nl/mirror/www.openzaurus.org/official/unstable/3.5.4/feed/base/prism3-support_1.0.0-r0_arm.ipk
Matt from matts . org writes: You only need to run "ipkg update" and "ipkg -d root install prism3-support" and the rest of these will install on their own as dependencies. This is in reference to collie of course.
